The MH-1 series, in its 50 kg and 100 kg versions, is intended for the vertical transport of small loads in places such as restaurants, hotels and offices, as well as in clinics and hospitals.
Thanks to its reduced dimensions, these appliances can be installed in small spaces and fix guide supports directly a wall.
Range of application
- Rated load of 50 kg and 100 kg.
- Rated speed 0,30 m/s.
- Maximum travel 16 m 4:1 ratio.
- Not suitable for the lifting of persons.
Technical specifications
- Drive system by means of a single acting hydraulic cylinder, indirect traction (2:1 or 4:1).
- Traction by means of anti-rotating steel ropes.
- Rated speed 0,30 m/s.
- Pre-assembled 24 VDC electrical operation.
- Landing limit switches via magnetic scanners.
- Cabinet finished in AISI-304 polished stainless steel sheet.
- A removable intermediate tray in cabinet in polished AISI-304 stainless steel.
- Possibility of up to three boarding sides.
- Guillotine type doors in AISI-304 satin finish stainless steel.
- Three-phase electric motor.
- Push-button panel recessed into door frame, with landing push buttons in stainless steel for calling and sending service lift to any floor (with a luminous contoured busy indicator), pilot light indicating availability for use and acoustic warning of arrival to landing.
- Soft start hydraulic shock absorber.
Safety systems
- Pressure relief valve.
- Mechanical final limit safety contact.
- Hydraulic rupture valve.
- Interlocking doors and contact with the door closed.
Options
- Single-phase electric motor.
- Resistance to overheating for the hydraulic unit.
- Extra removable intermediate trays.
- 1-leaf swing door with electric lock (see for finish and other types of door).
- Galvanised sheet self-supporting structure (rings and columns) without closed gaps.
- Swinging door in AISI-304 satin stainless steel on ground floor, if the hydraulic unit is to be positioned inside the hollow.
- Food heater.